Monday, July 16, 2012

Oversize, Overweight Vehicle Permits at FooteWork

Did you know you can get a Oversize, Overweight Permit for your vehicle at FooteWork?
The Class A Oversize, Overweight permits are issued for vehicle and load combinations that are within specific size and weight limits. The load must be non-reducible. The Class A permit is issued for a single trip or thirty days.

Class A permits are issued only for travel on state routes.

The following eligibility criteria must be met before issuing a Class A permit:
  • Non-reducible
  • Specifically described load
  • Width of vehicle and/or load is 14 ft or less
  • Height of vehicle and/or load is 16 ft or less
  • Length of vehicle and/or load is 120 ft or less
  • Combined weight of vehicle and/or vehicle combination is 250,000 lbs or less
  • If load projects from side of vehicle and load is 12 in or more deep, the projection must not exceed 3 ft on either side
  • If load projects from side of vehicle and load is less than 12 in deep, the projection must not exceed 2 ft on either side
  • Permit may not be used to routinely transport legal loads on over width trailers
  • Vehicle must be currently registered for 80,000 lbs
Other special permits you can obtain through us:
  • Single Trip Permits
  • Envelope Permits
  • Registration or Use Fuel Permits
  • Class C Permits/Approvals 
Call us at 928-635-2006 for more information or come see us at one of our three offices in PrescottPrescott Valley, and Williams.  At FooteWork, we can handle all of your vehicle needs and transactions are completed in about 15 minutes!

Fast! Friendly! FooteWork!

No comments:

Post a Comment